Products
- Brake System[4]
- Suspension System[10]
- Air Intakes[7]
- Other Auto Parts[1]
- Auto Bearing[1]
- Lubricant[10]
- Anchors[1]
- Bolts[10]
- Nails[10]
- Nuts[10]
- Other Fasteners[9]
- Rivets[10]
- Screws[6]
- Washers[10]
Contact Us
- Contact Person : Mr. Yin Sunney
- Company Name : Suno Group Limited
- Tel : 86-10-84785786
- Fax : 86-10-84783493
- Address : Beijing,Beijing,Room2110,Block #A,Focus square center,No.6,Futong East Avenue,Wangjing,Chaoyang District,Beijing. China
- Country/Region : China
- Zip : 100102
Products List
Twist Nails
1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"
2). Grade: 4.8, 6.8, 8.8, 10.9, 12.9
Feature1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"2). Grade:4.8, 6.8, 8.8, 10.9, 12.93). Material:stainless steel, carbon steel, brass,...
Torx socket bolts
Torx socket bolts
1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"
2). Grade: 4.8, 6.8, 8.8, 10.9, 12.9
Feature1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"2). Grade:4.8, 6.8, 8.8, 10.9, 12.93). Material:stainless steel,...
DIN 980 Wing Screw
DIN 980 Wing Screw
Material:Brass,Stainless steel
Feature1). Size:M3-M64; 1/8"- 2-1/2"2). Grade:4.8, 6.8, 8.8, 10.9, 12.93). Material:stainless steel, carbon steel4). Treatment:Plain, hot dip galvanizing, Phosphated, Zinc, Nickel, Dacromet, black oxide5)....
Ball joint for TOYOTA 43310-09015
Suspension parts:ball joint 43310-09015
Surface treatment:polish, zinc plated, chrome
Certification:TS16949/ISO9001
Suspension parts-ball joint-43310-09015:ProvideTIE ROD END, BALL JOINT,RACK END,SIDE ROD ASSY, DRAG LINK,IDLER ARM,PITMAN ARM,CROSS ROD,CENTER LINK,ARM SHAFT...
DIN7990 Hex Bolts
DIN7990 Hex Bolts
1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"
2). Grade: 4.8, 6.8, 8.8, 10.9, 12.9
Feature1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"2). Grade:4.8, 6.8, 8.8, 10.9, 12.93). Material:stainless steel,...
All thread rod
1. Many sizes can be offered
2. Many kinds of material can be selected.
3. Quick delivery and good service
1. size: 1/8'' - 1'' (M3-M64)2. finish: plain, zinc plated, HDG3. stainless steel is also acceptable 4. Small quantity is acceptable.
...
Full Thread Rod
DIN975/DIN976 -Gr4.8
IFI136- Gr2
MATERIAL: CARBON STEEL Q235,1035..
DIN975/DIN976 -Gr4.8IFI136- Gr2Length:1M,2M,3MMATERIAL: CARBON STEEL Q235,1035Finishing: Plain, Zinc PlatedBlack, H. D. G.
...
DIN 7505 chipboard screws
DIN 7505 chipboard screws
1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"
2). Material:carbon steel
3). Grade: 4.8, 6.8, 8
Feature1). Size:M5-M20; 1/4"-5/8" Length:6-200mm; 3/4"-5"2). Grade:4.8, 6.8, 8.8, 10.9, 12.93)....
Sitting (Engine Mounting) for 52380-42082
Sitting (Engine Mounting) for 52380-42082:
1.high quality
2.good after service
Sitting (Engine Mounting) for 52380-42082:auto rubber cummins centre bearing,bearing ,shaft bearing,center bearing,centre bearing,Drive Shafts center support bearing, drive shaft center bearing,...
Spring Washers
Spring Washers
Finishment: Plain, ZP, Black, HDG
Material: stainless steel
Standard : DIN436/ Non-standard flat washer Size:British System #3/8~3″Metric(M5-M58)Finishment:Black, Galvnized,HDG-Material: carbon steel, alloy steel,stainless steel
...